PMP 450 Access Point

cambium - wireless broadband indonesiaThe Cambium Networks Point-to-Multipoint (PMP) 450 Access Point (AP) can provide more than 90 Mbps throughput and is interoperable with PMP 430 and PMP 100 Series Subscriber Modules (SM). Service providers with an installed base of PMP 100 subscribers can now migrate to new high-throughput PMP 450 modules to enhance overall capacity; allowing more users and/or higher rate plans.

Description

Throughput

125 Mbps

High Performance, Synchronization and Low Latency modules for Access and Backhaul

The Cambium 450 platform is designed for continued growth, and allows service providers to efficiently and cost-effectively offer popular multi-media services that maximize their revenue. The 450 solution provides reliable coverage across large service areas in urban, suburban, rural and remote locations. Network operators can provide high speed connectivity for streaming video, voice, and data services for business and residential connectivity. From innovative GPS synchronization options to interoperability with existing portfolio modules, the PMP 450 flexible deployment options make the product an excellent fit for high capacity, high reliability networks.

The Cambium 450 offers a flexible, reliable wireless broadband solution to support:

  • 3G / 4G offload
  • Border patrol
  • Disaster recovery
  • Leased line replacement
  • Rural connectivity
  • Smart grid advanced metering infrastructure (AMI)
  • Special events connectivity
  • Traffic monitoring and control.
  • Video surveillance

Throughput

125 Mbps

Specification Sheet

FEATURES

Frequency availability

2.4, 3.5, 3.65, 4.9 – 5.9 GHz

Frequency avFlexible channel widthailability

5, 7, 10, or 20 MHz channels

Configuration

Available in point-to-point and point-to-multipoint modules

Dynamic Adaptive Modulation

QPSK, 16QAM, 64QAM, and 256 QAM

Security

56-bit DES, FIPS-197 128-bit AES

Latency

3 – 5 msec

Synchronization

GPS Synchronization for scalability

PMP 450 Access Point

2.4
GHz
 3.5
GHz
 3.65
GHz
 5.4 – 5.8
GHz
 125
Mbps
 

Now available in most popular global bands, 2.4, 3.5, 3.65 and 5 GHz, the PMP 450 Access Point (AP) delivers a consistent and exceptionally high throughput – more than 125 Mbps per sector and more than 1 Gbps per tower. Also available as PMP 450 AP Lite supporting up to ten SMs per AP-ideal for MicroPOP and sectorized deployments.

PMP 450 Subscriber Module

2.4
GHz
 3.5
GHz
 3.65
GHz
 5.4 – 5.8
GHz
 100+
Mbps
 

Now available in most popular global bands, 2.4, 3.5, 3.65 and 5 GHz, the PMP 450 Subscriber Module (SM) supports tiered service models. Software defined upgrades allow throughput from 4 Mbps to over 100 Mbps and as a result improve revenue optimization.

SPECIFICATIONS

PTP 450
Product
MODEL NUMBER Connectorized Integrated
5 GHz C054045B002A (ROW)
C054045B006A (FCC)
C054045B004A (ROW-DES only)
C054045B001A (ROW)
C054045B005A (FCC)
C054045B003A (ROW-DES ONLY)
3.3-3.6 GHz C035045B002A
C035045B004A (DES ONLY)
C035045B001A
C035045B003A (DES ONLY)
3.55-3.8 GHz C036045B002A

C036045B004A (DES ONLY)

C036045B001A
C036045B003A (DES ONLY)
Spectrum
CHANNEL SPACING CONFIGURABLE ON 2.5 MHz INCREMENTS, SELECTABLE TO 50 KHz AT 3 GHz FREQUENCY
FREQUENCY RANGE 5470 – 5875 MHz 3300 – 3600 MHz
3550 – 3800 MHz
CHANNEL WIDTH 5 MHz, 10 MHz or 20 MHz (3.5, 7.0 MHz on 3GHz only)
Interface
MAC (MEDIA ACCESS CONTROL) LAYER CAMBIUM NETWORKS PROPRIETARY
PHYSICAL LAYER 2×2 MIMO A and MIMO B OFDM
ETHERNET INTERFACE 10/100/BaseT, half/full duplex, rate auto negotiated (802.3 compliant)
PROTOCOLS USED 1IPv4, UDP, TCP, IP, ICMP, Telnet, SNMP, HTTP, FTP
NETWORK MANAGEMENT HTTP, Telnet, FTP, SNMP v2c
VLAN 802.1ad (DVLAN Q-inQ), 802.1Q with 802.1p priority, dynamic port VID
Performance
ARQ YES
MODULATION LEVELS (ADAPTIVE) MCS SIGNAL TO NOISE REQUIRED (SNR, in dB)
1X QPSK – SISO 10
2X QPSK – MIMO-B 10
4X 16QAM – MIMO-B 17
6X 64QAM – MIMO-B 24
8X 256QAM – MIMO-B 24
RECEIVE SENSITIVITY (PER CHAIN, IN dB) 3 GHz 5GHz
1X/2X 4X 6X 8X 1X/2X 4X 6X 8X
@ 5MHZ CHANNEL -92 -86 -80 -73 -91 -85 -79 -69
@ 10MHZ CHANNEL -90 -83 -77 -70 -90 -83 -76 -64
@ 20MHZ CHANNEL -87 -80 -73 66 -87 -80 -72 -62
MAXIMUM DEPLOYMENT RANGE UP TO 40 MILES
LATENCY 3 – 5 ms, TYPICAL
GPS SYNCHRONIZATION YES, VIA EXTERNAL UGPS AND SEPARATE POWER SUPPLY
QUALITY OF SERVICE DIFFSERVE QoS
LINK BUDGET
ANTENNA BEAM WIDTH 55° AZIMUTH, 55° ELEVATION (BOTH POLARIZATIONS)
ANTENNA GAIN 9 dBi H+V, INTEGRATED PATCH (5GHz)
8 dBi DUAL SLANT, INTEGRATED PATCH (3 GHz)
TRANSMIT POWER RANGE -30 TO +22 dBm (COMBINED, TO EIRP LIMIT BY REGION) (1 dB INTERVAL) (25 dBm FOR 3 GHz)
MAXIMUM TRANSMIT POWER 22 dBm COMBINED OFDM (25 dBm FOR 3 GHz)
PHYSICAL
ANTENNA CONNECTION INTEGRATED PATCH ANTENNA, CONNECTORIZED VERSIONS AVAILABLE
SURGE SUPPRESSION IEC 61000-4-2 (ESD) 15kV (AIR), 8kV (contact)
IEC 61000-4-4 (EFT) 40A (5/50ns)
IEC 61000-4-5 (LIGHTNING) 100A (8/20mS)
MEAN TIME BETWEEN FAILURE > 40 YEARS
ENVIRONMENTAL IP55
TEMPERATURE -40°C TO +55°C (-40°F TO +131°F), 0-95% NON-CONDESNSING
WEIGHT 0.45 kg (1 lb.)
WIND SURVIVAL 190 km/hour (118 mi/hour)
DIMENSIONS (HxWxD) 30 x 9 x 9 cm (11.75” x 3.4” x 3.4”)
TYPICAL POWER CONSUMPTION 9 W (5 GHz), 12 W (3 GHz)
MAXIMUM POWER CONSUMPTION 12 W (5 GHz), 15 W (3 GHz)
INPUT VOLTAGE 20 TO 32 V
SECURITY
ENCRYPTION 56-bit DES, FIPS-197 128-bit AES
CERTIFICATIONS
INDUSTRY CANADA 109W-0002 (5.4, 5.8 GHz)
109W-0007 (3.5 GHZ)
109W-0009 (3.65 GHz)
FCC ID Z8H89FT0002 (5.4, 5.8 GHZ)
Z8H89FT0009 (3.65 GHZ)
CE EN 301 893 V1.6.1 (5.4 GHZ)
EN 302 502 V1.2.1 (5.8 GHZ)
EN 302 326-2 V1.2.2 (3 GHZ)
EN 302 326-3 V1.3.1 (3 GHZ)

Reviews

There are no reviews yet.

Be the first to review “PMP 450 Access Point”

Your email address will not be published. Required fields are marked *