PTP 450i series

Wireless service providers and enterprises need reliable, high-quality broadband connectivity that can be rapidly deployed and expanded. The ePMP architecture provides highly scalable broadband access solution that will allow you to build and expand your network with a faster return on investment. Cambium Networks’ radios deliver Bandwidth-intensive services such as VoIP, video and data to end users in multiple vertical markets, with high performance and exceptional reliability.

Description

Key Features:

  • An ultra-wide band radio supports 4900 MHz to 5925 MHz with dynamic interference filtering, improved transmit power and better receive sensitivity.
  • Rugged metal enclosure designed to meet IP-66 and IP-67 standards to withstand harsh environments. Optional ATEX/HAXLOC certified models available for hazardous
    deployments.
  • Dynamic Interference Filtering to provide industry leading noise isolation for improved performance Updated FPGA and SoC architecture triples the
    processing power compared to PMP 450 Multifunction AUX port allows for greater flexibility for deployment by adding a camera or other PoE directly.

Specification Sheet

FEATURES

Featured Title

2.4, 5.1, 5.2, 5.4, 5.8 GHz

Throughput

125 Mbps

SPECIFICATIONS

PTP 450i
Product
MODEL NUMBER 5 GHz (Connectorized C050045B001A C050045B003A C050045B005A C050045B007A)
Spectrum
CHANNEL SPACING Configurable on 2.5 MHz increments
FREQUENCY RANGE 4900 – 5925 MHz
CHANNEL WIDTH 5 MHz, 10 MHz or20 MHz
Interface
MAC (Media Access Control) Layer Cambium Networks proprietary
Physical Layer 2×2 MIMO OFDM
ETHERNET INTERFACE 100/1000BaseT, full duplex, rate auto negotiated (802.3 compliant)
PROTOCOLS USED IPv4, UDP, TCP, IP, ICMP, Telnet, SNMP, HTTP, FTP
NETWORK MANAGEMENT HTTP, HTTPS, Telnet, FTP, SNMP v3
VLAN 802.1ad (DVLAN Q-inQ), 802.1Q with 802.1p priority, dynamic port VID
Performance
ARQ Yes
MAXIMUM DEPLOYMENT RANGE Up to 58 to 400 miles minimum, depending on configuration
LATENCY 3 – 5 ms, typical
GPS Synchronization Yes, via Autosync (CMM3, CMM4)
Quality of Service Diffserve QoS
LINK BUDGET
ANTENNA BEAM WIDTH 10° azimuth for 23 dBi integrated antenna
ANTENNA GAIN +23 dBi H+V, integrated or external
Transmit Power Range 40 dB dynamic range (to EIRP limit by region) (1 dB step)
Maximum Transmit Power +27 dBm combined output
Physical
Antenna Connection 50 ohm, N-Type (Connectorized version only)
Surge Suppression EN61000-4-5: 1.2us/50us, 500 V voltage waveform
Recommended external surge suppressor: Cambium Networks Model # C000000L033A
Mean Time Between Failure > 40 Years
Environmental IP66, IP67
Temperature / Humidity -40°C to +60°C (-40°F to +140°F), 0-95% non-condensing
Weight Connectorized Approx. 2.0 kg (4.5 lbs)
Integrated Approx. 2.5 kg (5.5 lbs)
Wind Survival 190 km/hour (118 mi/hour)
Dimensions (HxWxD) Connectorized 26.0 x 13.4 x 6.4 cm (10.25” x 5.25” x 3.25”)
Integrated 31.0 x 31.0 x 6.4 cm (12” x 12” x 2.5”)
Power Consumption 15 W typical, 25 W max, 55 W max with Aux port PoE out enable
Input Voltage 48-59 V DC, 802.3at compliant
Mounting Wall or Pole mount with Cambium Networks Model # N000045L002A
Security
ENCRYPTION 56-bit DES, FIPS-197 128-bit AES
Certifications
CE TBD (4.9, 5.4, 5.8 GHz)
FCC ID TBD (4.9, 5.4, 5.8 GHz)
CE EN 301 893 v1.7.1 (5.4 GHz)
EN 302 625 v1.1.1 (Broadband Disaster Relief, 4.9 GHz, 5.1 GHz)
EN 302 502 v1.2.1 (5.8 GHz)

Reviews

There are no reviews yet.

Be the first to review “PTP 450i series”

Your email address will not be published. Required fields are marked *