PTP 650 Connectorized

cambium - wireless broadband indonesiaThe Cambium Networks Point-to-Multipoint (PMP) 450 Access Point (AP) can provide more than 90 Mbps throughput and is interoperable with PMP 430 and PMP 100 Series Subscriber Modules (SM). Service providers with an installed base of PMP 100 subscribers can now migrate to new high-throughput PMP 450 modules to enhance overall capacity; allowing more users and/or higher rate plans.

Description

Reliable, high-capacity, point-to-point wireless broadband for the most difficult real-world situations.

Cambium Networks leads the industry in spectral efficiency and performance with the Point-to-Point (PTP) 650 wireless backhaul. With up to 450 Mbps aggregate throughput in a 45 MHz channel, and operating from 4.9 to 6.05 GHz, PTP 650 systems let you reliably and securely handle today’s needs with scalability to meet future requirements.

Dynamic Spectrum OptimizationTM (DSO) is a unique capability offered by Cambium Networks that enables a system to automatically sample and change channels to avoid interference to optimize link performance without affecting link service. Full details on DSO are in our White Paper.

PTP 650 PERFORMANCE GUARANTEE – The PTP 650 is the highest performing, most reliable sub-6 GHz PTP radio on the market. Cambium Networks stands behind this claim by offering your money back if you find something that works better. Customers can deploy a PTP 650 link with confidence that it will be the best performing, most reliable product they can find. If proven otherwise, they can receive a full refund.

Specification Sheet

 

Firmware PTP 650 01-40


 

FEATURES

Frequency availability

4.9 GHz to 6.05 GHz

Frequency avFlexible channel widthailability

5, 10, 15, 20, 30, 40, and 45 MHz channels

Security

128/256-Bit AES Encryption, HTTPS/TLS and SNMPv3 management, RADIUS authentication, and configurable password rules.

Capacity

up to 450 Mbps

Modulation

256 QAM, Fast Adaptive Modulation,

Versatility

Easy to integrate layer 2 bridge implementation supports symmetric and asymmetric TDD operation, 1588v2, and Synchronous Ethernet precision timing and frequency.

Latency

1 – 3 ms

Reliability

Dynamic Spectrum Optimization

Interfaces

Two Gigabit Ethernet Ports, SFP port for optional fiber interface. Supports standard 802.3at PoE output port.

PTP 650 Integrated

2.4
GHz
 3.5
GHz
 3.65
GHz
 5.4 – 5.8
GHz
 125
Mbps
 

Now available in most popular global bands, 2.4, 3.5, 3.65 and 5 GHz, the PMP 450 Access Point (AP) delivers a consistent and exceptionally high throughput – more than 125 Mbps per sector and more than 1 Gbps per tower. Also available as PMP 450 AP Lite supporting up to ten SMs per AP-ideal for MicroPOP and sectorized deployments.

PTP 650 Connectorized

4.9 – 6.05
GHz
 450
Mbps
 

PTP 650 with external connectors for antennas. Includes the full suite of high performance capabilities including: Fast Adaptive Modulation, near and Non Line of Sight connectivity, layer 2 bridge implementation, symmetric and asymmetric TDD operation, and two Gigabit Ethernet ports.

650L

4.9 – 6.05
GHz
 up to 300
Mbps
 

PTP 650L is an affordable 300 Mbps throughput backhaul solution supporting 5, 10, 15, 20 MHz channels. Includes the full suite of high performance capabilities including: Fast Adaptive Modulation, near and Non Line of Sight connectivity, layer 2 bridge implementation, symmetric and asymmetric TDD operation, and two Gigabit Ethernet ports.

SPECIFICATIONS

PTP 650 SERIES
RADIO TECHNOLOGY
RF bands1 Wide-band operation 4.9 to 6.05 GHz (Allowable frequencies and bands are dictated by individual country regulations. The most common bands are listed here.)
4.940 – 4.990 GHz (Public Safety)
5.15 – 5.25 GHz
5.25 – 5.35 GHz
5.470 – 5.725 GHz
2 5.725 – 5.850 GHz
5.825 – 6.050 GHz
Channel sizes3 5, 10, 15, 20, 30, 40, and 45 MHz channels
Channel sizes depend on individual country regulations
Spectral efficiency 10 bps/Hz maximum
Channel selection By Dynamic Spectrum Optimization or manual intervention;
automatic selection on start-up and continual self-optimization to avoid interference
Maximum transmit power4 Up to 27 dBm at BPSK; up to 23 dBm at 256 QAM
System gain4 Integrated: Up to 164 dB with 20 MHz channel and integrated 23 dBi antenna;
varies with modulation mode, channel size and spectrum
Receiver sensitivity -98 dBm with 5 MHz channel
Modulation / error correction Fast Preemptive Adaptive Modulation featuring 13 modulation / FEC coding levels ranging from BPSK to 256 QAM dual payload MIMO
Duplex scheme Synchronized Time Division Duplex (TDD) and Half Duplex Frequency Division Duplex (HD-FDD); dynamic or fixed transmit/receive ratio; each TDD-synchronized link requires a Cambium TDD-SYNC synchronization unit5 to provide an accurate timing reference signal
Antenna Integrated: Flat panel – 23 dBi
Connectorized: Can operate with a selection of separately-purchased single- and dual-
polarity antennas through 2 x N-type female connectors (local regulations should be checked prior to purchase)
Range Up to 124 miles (200 km)
Security FIPS-197 compliant 128/256-bit AES Encryption (optional)
HTTPS and SNMPv3Identity-based user accounts
Configurable password rulesUser authentication and RADIUS support
Event logging and management; optional logging via syslog
Disaster recovery and vulnerability management
ETHERNET BRIDGING
Protocol IEEE 802.3
User data throughput Dynamically variable up to 450 Mbps
Maximum conditions – 2×2, 45 MHz channel1, 256 QAM
Flexible capacity licensing model:
Lite Capacity: Up to 125 Mbps
Mid Capacity: Up to 250 Mbps
Full Capacity: Up to 450 MbpsPAGE
Latency 1 – 3 ms one-direction latency
QoS 8 Queues
Packet classification Layer 2 and Layer 3 IEEE 802.1p, MPLS, Ethernet priority
Packet performance Line rate ( >850K packets per second)
Timing transport Synchronous Ethernet; IEEE 1588v25
Frame support Jumbo frame up to 9600 bytes
Flexible I/O 2 x Gigabit Ethernet copper ports:
Gigabit Port 1: Data + PoE power input
Gigabit Port 2: 802.3at PoE output port
SFP port (single-mode fiber, multi-mode fiber, and copper Gigabit Ethernet options available)
T1/E1 TDM support 8 x T1/E1 TDM module (optional indoor unit)5
G.823-compliant timing
DC power input (compatible with AC+DC Power Injector output)
T1/E1 latency (one way) 1 to 3 ms typical depending on range, bandwidth, modulation mode and number of T1/E1 ports; accurate T1/E1 latency figures can be determined for any given configuration using the Cambium PTP LINKPlanner
MANAGEMENT & INSTALLATION
LED indicators Power status, Ethernet link status, and activity on Extended Range PoE supply
Network management In-band and out-of-band management (OOBM)5
System management IPv6/IPv4 dual-stack management support
Web access via browser using HTTP or HTTPS/TLS6
SNMP v1, v2c and v3, MIB-II and proprietary PTP MIB
Cambium Wireless Manager, WM 4.0/SP4 or higher
Online spectrum analyzer (no impact on payload traffic or network operation)
Installation Built-in audio and graphical assistance for link optimization
Connection Distance between outdoor unit and primary network connection: up to 330 feet (100 meters) using Power-over-Gigabit Ethernet; longer distances up to 984 feet (300 meters) can be achieved using fiber interface
PHYSICAL
Dimensions Integrated Outdoor Unit (ODU):
Width 371mm (14.6”), Height 371mm (14.6”), Depth 81mm (3.2”)
Connectorized ODU:
Width 204mm (8.0”), Height 318mm (12.5”), Depth 90mm (3.5”)
Weight Integrated ODU: 4.1 kg (8.95 lbs) including bracket
Connectorized ODU: 3.1 kg (6.8 lbs) including bracket
Operating temperature -40° to +140° F (-40° to +60° C), including solar radiation
Dust-water intrusion protection IP66 and IP67
Wind speed survival 200 mph (322 kph)
Power supply Two options:
AC power injector: 32° to 104° F (0° to +40° C); 35 W; 90-240 VAC, 50/60 Hz
Dimensions: Width 5.2” (132mm), Height 1.4” (36mm), Depth 2” (51mm)
AC + DC power injector: -40° to 140° F (-40° to +60° C); 70 W; 90-240 VAC, 50/60 Hz
Dimensions: Width 9.75” (250 mm), Height 1.5” (40 mm), Depth 3” (80 mm)
Power consumption 30 W maximum (up to 70 W with 802.3at device on auxiliary port)
ENVIRONMENTAL & REGULATORY
Protection and safety UL60950-1; IEC60950-1; EN60950-1; CSA-C22.2 No. 60950-1; CB approval for Global
Radio 4.9 GHz: FCC Part 90Y, RSS-111
5.x GHz: FCC Part 15, sub-parts 15C and 15E; RSS 210 Issue 8;
EN 302 502; EN 301 893 Eire ComReg 02/71R1, UK Approval to IR2007
EMC Europe – EN 301 489-1 and -4

Reviews

There are no reviews yet.

Be the first to review “PTP 650 Connectorized”

Your email address will not be published. Required fields are marked *